FullCure 720 – Transparent

A rigid colourless material with great dimensional stability. Used for general purpose, finely detailed parts and simulation of translucent thermoplastic.  This material is also ideally suited to the production of assembly and QC jigs.

Click here to find out more about Jigs and Fixtures

Property ASTM Units Metric Units Imperial
Tensile Strength D-638-03 MPa 50-65 psi 7,250-9,450
Elongation at Break D-638-05 % 15-25 % 15-25
Modulus of Elasticity D-638-04 MPa 2,600-3,000 psi 290,000-435,000
Flexural Strength D-790-03 MPa 80-110 psi 12,000-16,000
Flexural Modulus D-790-04 MPa 2,700-3,300 psi 390,000-480,000
HDT, oC @ 0.45MPa D-648-06 oC 45-50 oF 113-122
HDT, oC @ 1.82MPa D-648-06 oC 45-50 oF 113-122
Izod Notched Impact D-256-06 J/m 20-30 ft lb/inch 0.375-0.562
Water Absorption D-570-98 24hr % 1.5-2.2 % 1.5-2.2
Tg DMA, E>> oC 48-50 oF 118-122
Shore Hardness (D) Scale D Scale D 83-86 Scale D 83-86
Rockwell Hardness Scale M Scale M 73-76 Scale M 73-76
Polymerized Density ASTM D792 g/cm3 1.18-1.19
Ash Content USP281 % 0.01-0.02 % 0.01-0.02